HV200 by Banjo | Manifold Flange Connections | 2" MPT Inductor | Pressure at Pump: 225 PSI | Volume Draw: 49 GPM | Opening Size: 7/16" | PolypropyleneApplications: Fluids Features: Threaded or manifold ends Glass reinforced polypropylene Note: Each venturi comes in two pieces Note: The inductor is designed for use with a volume pump. Typical volumes and pressures used to operate the venturi would be in the 80 to 240 US GPM range at pressures from 26 to 52 PSI Note: US GPM. Tests done with water at ambient temperature. Pump used for test was a 2" Banjo (5 vane impeller) driven by a 5. 5 hp Honda gas